Produktai skirti rider fibre c (10)

CENTER UNITUBE CONSTRUCTION, METAL-FREE, LONGITUDINALLY WATERTIGHT, SLIGHT RODENT PROTECTION, HALOGEN-FREE, FLAME RETARDANT Suited for indoor and outdoor use - for fixed laying in cable ducts, conduits or direct burial FILLING:dry filling / swellable materials PRODUCT SUITABILITY:Fiber optic cable Application:central, gel-filled loose tube Fiber / tube colors:PENGG KABEL standard according to “Color codes – Fiber optic cables” in the document Standard marking:PENGG KABEL – cable type – fiber count/type – ID number – CPR class CE-marking – meter tube diameter mm:3,5 number of tubes:1 max. fibers / tube:24 max. number of fibers:24 tensile strength approx. N:1.500 weight approx. kg/km:70 outer diameter approx. mm:8,5 fire load MJ/m:1 compressive strength (crush):3000 N/10 cm impact:10 Nm torsion:5 cycles ±360° kink, cable:The cable do not form a kink when a loop is drawn together to a diameter 12 times min. bending radius:R = 20 x D (cable outer diameter) storage and transport:-40°C up to +70°C installation: -5°C up to +60°C operation:-25°C up to +70°C water penetration:No water on free end

CENTER UNITUBE CONSTRUCTION, METAL-FREE, LONGITUDINALLY WATERTIGHT Suited for outdoor use - for Metro, Access or FTTx implementations and and for blowing in into mini pipe systems FILLING:dry filling / swellable materials PRODUCT SUITABILITY:Fiber optic cable Standard marking:PENGG KABEL – cable type – fiber count/type – ID number – meter tube diameter mm:3,0 number of tubes:1 max. fibers / tube:24 max. number of fibers:24 tensile strength approx. N:400 weight approx. kg/km:13,0 outer diameter approx. mm:3,9 compressive strength (crush):1000 N/10 cm impact:1 Nm (3 impacts, 300 mm hammer radius) torsion:5 cycles ±360° kink, tube:The tube do not kink min. bending radius:R = 20 x D (cable outer diameter) storage and transport:-30°C up to +70°C installation:-5°C up to +50°C operation:-20°C up to +70°C water penetration:No water on free end

RAILFOOT CABLE, LOOSE TUBE CONSTRUCTION, METAL-FREE, WATERTIGHT, RODENT PROTECTION, ALUMINIUM-PE-COMPOSITE-LAYER SHEATH, STEEL WIRE ARMOURING The fiber-optic railfoot cable is designed for use in telecommunication systems. It can be laid directly on the rail foot or other areas subjected to vibrations and impacts, but is also suitable for fixed laying in cable ducts, conduits or direct burial. FILLING:dry filling / swellable materials OVERALL SHIELD, REINFORCEMENT:composite layer (L) round steel wires PRODUCT SUITABILITY:Railway cable fiber optic cable Fiber colors:red, green, blue, yellow Tube colors:first tube red, other tubes yellow Standard marking:PENGG KABEL – cable type – fiber count/type – ID number – meter tube diameter mm:2,0 number of tubes:6 max. fibers / tube:4 max. number of fibers:24 tensile strength approx. N:3.500 weight approx. kg/km:310 outer diameter approx. mm:15,6 tensile strength:see above table specification:DB TL 416.0510 compressive strength (crush):3000 N/10 cm impact:25 Nm torsion:5 cycles ±360° kink, cable:The cable do not form a kink when a loop is drawn together to a diameter 12 times water penetration:No water on free end

LOOSE TUBE CONSTRUCTION, LONGITUDINALLY WATERTIGHT, SLIGHT RODENT PROTECTION, HALOGEN-FREE, FLAME RETARDANT Suited for indoor and outdoor use - for fixed laying in cable ducts, conduits or direct burial FILLING:dry filling / swellable materials PRODUCT SUITABILITY:Fiber optic cable Application:FRP central element Fiber / tube colors:PENGG KABEL standard according to “Color codes – Fiber optic cables” in the document Standard marking:PENGG KABEL – cable type – fiber count/type – ID number – CPR class CE-marking – meter compressive strength (crush):3000 N/10 cm impact:25 Nm torsion:5 cycles ±360° kink, cable:The cable do not form a kink when a loop is drawn together to a diameter 12 times min. bending radius:R = 20 x D (cable outer diameter) storage and transport:-40°C up to +70°C installation: -5°C up to +60°C operation:-30°C up to +70°C water penetration:No water on free end

DUPLEX CABLE, FIGURE-0, METAL-FREE, HALOGEN-FREE, FLAME RETARDANT Suitable for assembly into a duplex connection cable between passive and active network components indoors, designed as “figure 0" PRODUCT SUITABILITY:Fiber optic cable Sheath color:yellow (E9) orange (G50, G62.5) turquoise (G50 OM3) Standard marking:PENGG KABEL – cable type – fiber count/type – ID number – meter compressive strength (crush):1000 N/10 cm impact:5 Nm static:15 x cable-diameter dynamic:20 x cable-diameter storage and transport:0°C up to +50°C installation:0°C up to +50°C operation:0°C up to +50°C

CENTER UNITUBE CONSTRUCTION, METAL-FREE, LONGITUDINALLY WATERTIGHT, SLIGHT RODENT PROTECTION, HALOGEN-FREE, FLAME RETARDANT Suited for indoor and outdoor use - for fixed laying in cable ducts, conduits or direct burial FILLING:dry filling / swellable materials PRODUCT SUITABILITY:Fiber optic cable tube diameter mm:3,0 number of tubes:1 max. fibers / tube:24 max. number of fibers:24 tensile strength approx. N:1.000 weight approx. kg/km:35 outer diameter approx. mm:6,3 fire load MJ/m:1 compressive strength (crush):2000 N/10 cm impact:5 Nm torsion:5 cycles ±360° kink, cable:The cable do not form a kink when a loop is drawn together to a diameter 12 times min. bending radius:R = 20 x D (cable outer diameter) storage and transport:-40°C up to +70°C installation: -5°C up to +60°C operation:-25°C up to +70°C water penetration:No water on free end

FOAM-SKIN-PE INSULATED, QUAD TWISTED, JELLY FILLED TELECOMMUNICATION CABLE Cable for outdoor application designed for high frequency XDSL-connections for blowing technique FILLING:petrol jelly OVERALL SHIELD, REINFORCEMENT:unshielded PRODUCT SUITABILITY:Telecommunication cable ladder:solid, bare copper wire Ø 0.6 mm Insulating sleeve:Foam skin PE Verseilung:Four cores each stranded to form star fours, star quads to form a cable core, a drain wire filling:Cable core filled with petrolatum, wrapped with plastic tape Mantel:PE, orange Moisture barrier:0.15 mm aluminum tape with polyethylene (0.05 mm) coated on both sides Conductor diameter:0,6 mm Conductor resistance:≤66 Ω / km Change in resistance:≤2 % Insulation resistance:≥5 GΩkm Operating capacity:≤55 nF / km Propagation speed (1MHz):≤60 % Ader / Ader:700 Veff/50Hz/1min Characteristic impedance (1-60 MHz):110 ±15% Ω

LOOSE TUBE CONSTRUCTION, METAL-FREE ADSS (all-dielectric-self-supporting) cable are metal-free air hanging cable, suited for fixing on poles. The pole distance is at 4 kN maximum 60 m. FILLING:unfilled PRODUCT SUITABILITY:Fiber optic cable Application:FRP central element Fiber / tube colors:PENGG KABEL standard according to “Color codes – Fiber optic cables” in the document Standard marking:PENGG KABEL – cable type – fiber count/type – ID number – meter compressive strength (crush):3000 N/10 cm impact:25 Nm torsion:5 cycles ±360° kink, cable:The cable do not form a kink when a loop is drawn together to a diameter 12 times min. bending radius:R = 20 x D (cable outer diameter) storage and transport:-40°C up to +70°C installation:-5°C up to +60°C operation:-30°C up to +70°C span distance:up to 60 m

CENTER UNITUBE CONSTRUCTION, METAL-FREE, LONGITUDINALLY WATERTIGHT, SLIGHT RODENT PROTECTION Suited for outdoor use - for fixed laying in cable ducts, conduits or direct burial FILLING:dry filling / swellable materials PRODUCT SUITABILITY:Fiber optic cable Application:central, gel-filled loose tube Fiber / tube colors:PENGG KABEL standard according to “Color codes – Fiber optic cables” in the document Standard marking:PENGG KABEL – cable type – fiber count/type – ID number – meter compressive strength (crush):2000 N/10 cm impact:5 Nm torsion:5 cycles ±360° kink, cable:The cable do not form a kink when a loop is drawn togehter to a diameter of 100 mm. min. bending radius:R = 20 x D (cable outer diameter) water penetration:No water on free end storage and transport:-40°C up to +70°C installation:-5°C up to +60°C operation:-25°C up to +70°C water penetration:No water on free end

PE-INSULATED, LOCAL TELECOMMUNICATION CABLE WITH COPPER SHIELD In all kinds of operating premises (excepted locations with special protection demands - like in fire or highly combustible premises); e.g. for local area networks of the telecom, as station communication cables and for small telephone networks of industry, traffic and public utilities. FILLING:unfilled OVERALL SHIELD, REINFORCEMENT:copper braid or tape PRODUCT SUITABILITY:Telecommunication cable ladder:solid, bare copper wire Ø 0.8 mm Insulating sleeve:PE ( 2Y ) Verseilung:four cores to star fours each; Star quads stranded in layers to form a cable core umbrella:Wrapping with copper tape ( C ) Mantel:PE, black ( 2Y ) laying:Suitable for laying in earth, water, cable ducts, pipelines, etc. imprint:<Telephone receiver> <meter> Regulation:TLB X5019 (03.67) Conductor diameter:0,8 mm Loop resistance:≤73,2 Ω / km Insulation resistance:≥10 GΩkm Operating capacity (at f = 800Hz):≤55 nF / km Operating voltage:200 VAC Ader / Ader:500 V / 50Hz Core / screen:2000 V / 50Hz laying:-20 to +50 °C business:up to +70 °C